您好,欢迎来到精彩纵横!
当前位置:首页 >> 招标信息 >> 变更公告 >> 国际招标
你可能感兴趣的项目

项目名称:

AE4591-2022

间:2022-11-25
报名截止时间:2022-11-28

立即查看

项目名称:

AA7525-2022-002

间:2022-11-25
报名截止时间:2022-11-28

立即查看

项目名称:

AA7529-2022-002

间:2022-11-25
报名截止时间:2022-11-28

立即查看

S15TDHE项目质量实验室新增检具、测量设备采购-缸体圆度仪国际招标澄清或变更[变更公告]
【信息时间:2022-07-29  阅读次数:1048】我要打印】【关闭

 

澄清或变更简要说明:投标人应具备的资格或业绩有变更,本项目原要求为“(1)投标人必须是制造商,现变更为投标人必须是制造商或制造商直接授权的代理商参加投标,详见变更公告及变更后招标文件。招标文件领购截止时间延长至85日。

广西机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标,于2022-07-29在中国国际招标网发布变更公告。 本次招标采用传统招标方式,现邀请合格投标人参加投标。

1.招标条件

项目概况:本招标项目为S15TDHE项目质量实验室新增检具、测量设备采购,招标人为柳州赛克科技发展有限公司,建设资金为招标人自筹。项目资金已经落实,已具备招标条件,现对该项目下列货物和有关服务进行国际公开招标。

资金到位或资金来源落实情况:项目资金已经落实

项目已具备招标条件的说明:已具备招标条件

2.招标内容

招标项目编号:0633-224012118966/02

招标项目名称:S15TDHE项目质量实验室新增检具、测量设备采购

项目实施地点:中国广西壮族自治区柳州市

招标产品列表(主要设备):

项序号

产品名称

数量

简要技术规格

备注

1

缸体圆度仪

1

气缸孔直径:65-90mm

轴向测量范围:200mm

圆周上旋转测量路径:360

径向测量范围:≥±1000µm

解析:0.05µm

每次旋转测量值次数:≥14,400

重复精度圆度:≤1.0 um

圆柱度:≤1.5 um

直径:≤1.5 um

测量精度圆度:≤1.0 um

圆柱度:≤1.5 um

直径:≤1.5 um

 

3.投标人资格要求

投标人应具备的资格和业绩:1)投标人必须是制造商或制造商直接授权的代理商参加投标,在招标机构登记并购买了招标文件,并已在必联网、机电产品招标投标电子交易平台成功注册。(2)投标产品制造商必须通过ISO 9001认证或QS 9000认证,及必须通过ISO 14000认证,并在投标文件中提供相应的证书复印件。(3)投标人至少完成过1项缸体缸盖曲轴测量仪供货业绩并在投标文件中提供部分业绩合同首页复印件以及用户清单,用户清单包括但不限于以下内容:用户名、型号、联系人、联系电话。(4)投标产品制造商应有1条或以上产线供货相关经验,并在投标文件中提供部分业绩合同首页复印件以及用户清单,用户清单包括但不限于以下内容:用户名、型号、联系人、联系电话。(5投标人需安排至少1名(含1名)现场工作服工程师,服务工程师必须至少有3年的工作经验,在投标文件中提供服务工程师的名单及介绍(如有证书或业绩,需附上证书和业绩复印件)。

是否接受联合体投标:不接受

未领购招标文件是否可以参加投标:不可以

4.招标文件的获取

招标文件领购开始时间:2022725

招标文件领购结束时间:202285

是否在线售卖标书:

获取招标文件方式:现场领购

招标文件领购地点:本项目只发售电子版招标文件,请潜在投标人于本招标公告有效期限内,登录精彩纵横电子交易平台(www.jczh100.com)在线支付后下载招标文件。

招标文件售价:¥1000 / $160

5.投标文件的递交

投标截止时间(开标时间):202281610:00(北京时间)

投标文件送达地点:广西机电设备招标有限公司柳州分公司(地址:广西柳州市东环大道230号居上V8A191912号开标室)

开标地点:广西机电设备招标有限公司柳州分公司(地址:广西柳州市东环大道230号居上V8A191912号开标室)

6.投标人在投标前应在必联网(https://www.ebnew.com)或机电产品招标投标电子交易平台(https://www.chinabidding.com)完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。

7.联系方式

招标人:柳州赛克科技发展有限公司

地址:广西柳州市柳东新区车园横二路1

联系人:秦光勇

联系方式 0772-2189038

招标代理机构:广西机电设备招标有限公司

地址:广西南宁市金湖路63号金源CBD现代城7层(530021

联系人:廖俐娜、苏畅

联系方式 0771-28338212833580 传真:0771-2830802

电子邮件:dept1@gxbidding.cn

8.汇款方式

/

9.其他补充说明

机电产品招标投标电子交易平台(https://www.chinabidding.com)为国家商务部指定的全国机电产品国际招标投标活动公共服务平台和行政监督平台,注册事宜请联系机电产品招标投标电子交易平台,相关要求详见《机电产品国际招标投标实施办法》。

Clarify or changeThere is a change in the qualification or performance required by the bidder. The original requirement of this project is "(1) The bidder must be a manufacturer", but now it is changed to "the bidder must be a manufacturer or an agent directly authorized by the manufacturer to participate in the bidding". Please see the change announcement and the bidding document after the change for details.The deadline for purchasing tender documents has been extended to August 5.

Guangxi Machinery & Electric Equipment Tendering Co.,Ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2022-07-29.

1. Bidding Conditions

Overview: Liuzhou Saike Technology Development Co., Ltd.invites sealed bids from eligible suppliers by the way of international competitive bidding, and the project’s fund has been confirmed.

Source of Funds: The project’s fund has been confirmed.

Description of The Prepared Bidding Conditions: The project’s fund has been confirmed.

2. Bidding Content

Bidding No: 0633-224012118966/02

Project Name: S15TDHE project quality laboratory new gage, measuring equipment procurement

Place of Implementation: Liuzhou, Guangxi

List of Products:

NO.

Product Name

Quantity

Main Technical Data

Remarks

1

Block bore roundness tester

1 set

Diameter of cylinder bore:  65-90mm

Axial measuring range:  200mm

Rotate measuring path on the circumference: 360 degree

Radial measuring range:  ≥±1000µm

Resolution:  0.05µm

Number of measured value per rotation:  ≥14,400

Repeating accuracy    

Roundness : ≤1.0 um

Cylindricity  :   ≤1.5um

Diameter: ≤1.5um

 

Measuring accuracy   

Roundness : ≤1.0 um

Cylindricity :≤1.5um

Diameter: ≤1.5um

 

3. Qualification Requirements for Bidder

Qualifications and Performance

(1) Bidder must be the manufacturer or manufacturer directly authorized agents to participate in the bidding, has been successfully registered in the BIDLINKhttps://www.ebnew.com)、China International Tendering Network (www.chinabidding.com), and in the tender registration and purchase of tender documents. (2) The manufacturer of the bidding products must pass ISO 9001 certification or QS 9000 certification, and must pass ISO 14000 certification, and provide copies of the corresponding certificates in the bidding documents. (3) The bidder shall have completed at least one supply performance of cylinder block and cylinder head crankshaft measuring instrument, and shall provide a copy of part of the first page of the performance contract and the user list in the bidding document, which shall include but not limited to the following contents: user name, model, contact person and phone number. (4) The manufacturer of the bidding products shall have 1 or more experience in production line supply, and provide a copy of the first page of part of the performance contract and a list of users in the bidding documents, including but not limited to the following contents: user name, model, contact person and phone number. (5) The bidder shall arrange at least one (including one) field service engineer, who shall have at least 3 years' working experience. The list and introduction of service engineer shall be provided in the bidding document (if any certificates or achievements are available, copies of certificates and achievements shall be attached).

Joint Bids: NOT Available

Bid without the bidding documents: NOT Available

4. Acquisition of Bidding Documents

Beginning of Selling Bidding Documents: 2022-7-25

Ending of Selling Bidding Documents: 2022-8-5

Sell bidding doc online or notNo

To Obtain: On-site Purchase

Place: project only offer electronic tender documents, please invite potential bidders in this bidding announcement valid period, login (www.jczh100.com) downloading bidding documents after online payment.

Price of Bidding Documents: 1000/$160

5. Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time): 2022-8-16 10:00

Place of Bid: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd.( Address: 1912,19F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

Place of Bid Opening: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd.( Address: 1912,19F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

6. The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on

    www.chinabidding.com.

7. Contact Details

Purchasers:Liuzhou Saike Technology Development Co., Ltd.

Add.: No.1, Cheyuan HengEr Road,Liudong New District, Liuzhou City, Guangxi, P.R.C.

Contact: Mr.Qin Guangyong

Tel.: (0086)772- 2189038

Bidding Agency: Guangxi Machinery and Electric Equipment Tendering Co., Ltd

Add.: 7/F, Jinyuan CBD Building, No.63, Jinhu Road, Nanning, Guangxi

Contact: Ms.Liao Lina, Mr. Su Chang

Tel.: (0086) 771-2833821/2833580   Fax: (0086)771-2830802

8. Remittance Approach

9. Additional Instructions

www.chinabidding.com for International Tendering and bidding of mechanical and electrical products nationwide designated by the State Department of Commerce and public service platform administrative supervision platform, registration please contact www.chinabidding.com., refer to "mechanical and electrical products in the international bidding implementation measures" implementation.

 

 

我 要
投 标
S15TDHE项目质量实验室新增检具、测量设备采购-缸体圆度仪国际招标澄清或变更[变更公告]
【信息时间:2022-07-29  阅读次数:1048】我要打印】【关闭

 

澄清或变更简要说明:投标人应具备的资格或业绩有变更,本项目原要求为“(1)投标人必须是制造商,现变更为投标人必须是制造商或制造商直接授权的代理商参加投标,详见变更公告及变更后招标文件。招标文件领购截止时间延长至85日。

广西机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标,于2022-07-29在中国国际招标网发布变更公告。 本次招标采用传统招标方式,现邀请合格投标人参加投标。

1.招标条件

项目概况:本招标项目为S15TDHE项目质量实验室新增检具、测量设备采购,招标人为柳州赛克科技发展有限公司,建设资金为招标人自筹。项目资金已经落实,已具备招标条件,现对该项目下列货物和有关服务进行国际公开招标。

资金到位或资金来源落实情况:项目资金已经落实

项目已具备招标条件的说明:已具备招标条件

2.招标内容

招标项目编号:0633-224012118966/02

招标项目名称:S15TDHE项目质量实验室新增检具、测量设备采购

项目实施地点:中国广西壮族自治区柳州市

招标产品列表(主要设备):

项序号

产品名称

数量

简要技术规格

备注

1

缸体圆度仪

1

气缸孔直径:65-90mm

轴向测量范围:200mm

圆周上旋转测量路径:360

径向测量范围:≥±1000µm

解析:0.05µm

每次旋转测量值次数:≥14,400

重复精度圆度:≤1.0 um

圆柱度:≤1.5 um

直径:≤1.5 um

测量精度圆度:≤1.0 um

圆柱度:≤1.5 um

直径:≤1.5 um

 

3.投标人资格要求

投标人应具备的资格和业绩:1)投标人必须是制造商或制造商直接授权的代理商参加投标,在招标机构登记并购买了招标文件,并已在必联网、机电产品招标投标电子交易平台成功注册。(2)投标产品制造商必须通过ISO 9001认证或QS 9000认证,及必须通过ISO 14000认证,并在投标文件中提供相应的证书复印件。(3)投标人至少完成过1项缸体缸盖曲轴测量仪供货业绩并在投标文件中提供部分业绩合同首页复印件以及用户清单,用户清单包括但不限于以下内容:用户名、型号、联系人、联系电话。(4)投标产品制造商应有1条或以上产线供货相关经验,并在投标文件中提供部分业绩合同首页复印件以及用户清单,用户清单包括但不限于以下内容:用户名、型号、联系人、联系电话。(5投标人需安排至少1名(含1名)现场工作服工程师,服务工程师必须至少有3年的工作经验,在投标文件中提供服务工程师的名单及介绍(如有证书或业绩,需附上证书和业绩复印件)。

是否接受联合体投标:不接受

未领购招标文件是否可以参加投标:不可以

4.招标文件的获取

招标文件领购开始时间:2022725

招标文件领购结束时间:202285

是否在线售卖标书:

获取招标文件方式:现场领购

招标文件领购地点:本项目只发售电子版招标文件,请潜在投标人于本招标公告有效期限内,登录精彩纵横电子交易平台(www.jczh100.com)在线支付后下载招标文件。

招标文件售价:¥1000 / $160

5.投标文件的递交

投标截止时间(开标时间):202281610:00(北京时间)

投标文件送达地点:广西机电设备招标有限公司柳州分公司(地址:广西柳州市东环大道230号居上V8A191912号开标室)

开标地点:广西机电设备招标有限公司柳州分公司(地址:广西柳州市东环大道230号居上V8A191912号开标室)

6.投标人在投标前应在必联网(https://www.ebnew.com)或机电产品招标投标电子交易平台(https://www.chinabidding.com)完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。

7.联系方式

招标人:柳州赛克科技发展有限公司

地址:广西柳州市柳东新区车园横二路1

联系人:秦光勇

联系方式 0772-2189038

招标代理机构:广西机电设备招标有限公司

地址:广西南宁市金湖路63号金源CBD现代城7层(530021

联系人:廖俐娜、苏畅

联系方式 0771-28338212833580 传真:0771-2830802

电子邮件:dept1@gxbidding.cn

8.汇款方式

/

9.其他补充说明

机电产品招标投标电子交易平台(https://www.chinabidding.com)为国家商务部指定的全国机电产品国际招标投标活动公共服务平台和行政监督平台,注册事宜请联系机电产品招标投标电子交易平台,相关要求详见《机电产品国际招标投标实施办法》。

Clarify or changeThere is a change in the qualification or performance required by the bidder. The original requirement of this project is "(1) The bidder must be a manufacturer", but now it is changed to "the bidder must be a manufacturer or an agent directly authorized by the manufacturer to participate in the bidding". Please see the change announcement and the bidding document after the change for details.The deadline for purchasing tender documents has been extended to August 5.

Guangxi Machinery & Electric Equipment Tendering Co.,Ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2022-07-29.

1. Bidding Conditions

Overview: Liuzhou Saike Technology Development Co., Ltd.invites sealed bids from eligible suppliers by the way of international competitive bidding, and the project’s fund has been confirmed.

Source of Funds: The project’s fund has been confirmed.

Description of The Prepared Bidding Conditions: The project’s fund has been confirmed.

2. Bidding Content

Bidding No: 0633-224012118966/02

Project Name: S15TDHE project quality laboratory new gage, measuring equipment procurement

Place of Implementation: Liuzhou, Guangxi

List of Products:

NO.

Product Name

Quantity

Main Technical Data

Remarks

1

Block bore roundness tester

1 set

Diameter of cylinder bore:  65-90mm

Axial measuring range:  200mm

Rotate measuring path on the circumference: 360 degree

Radial measuring range:  ≥±1000µm

Resolution:  0.05µm

Number of measured value per rotation:  ≥14,400

Repeating accuracy    

Roundness : ≤1.0 um

Cylindricity  :   ≤1.5um

Diameter: ≤1.5um

 

Measuring accuracy   

Roundness : ≤1.0 um

Cylindricity :≤1.5um

Diameter: ≤1.5um

 

3. Qualification Requirements for Bidder

Qualifications and Performance

(1) Bidder must be the manufacturer or manufacturer directly authorized agents to participate in the bidding, has been successfully registered in the BIDLINKhttps://www.ebnew.com)、China International Tendering Network (www.chinabidding.com), and in the tender registration and purchase of tender documents. (2) The manufacturer of the bidding products must pass ISO 9001 certification or QS 9000 certification, and must pass ISO 14000 certification, and provide copies of the corresponding certificates in the bidding documents. (3) The bidder shall have completed at least one supply performance of cylinder block and cylinder head crankshaft measuring instrument, and shall provide a copy of part of the first page of the performance contract and the user list in the bidding document, which shall include but not limited to the following contents: user name, model, contact person and phone number. (4) The manufacturer of the bidding products shall have 1 or more experience in production line supply, and provide a copy of the first page of part of the performance contract and a list of users in the bidding documents, including but not limited to the following contents: user name, model, contact person and phone number. (5) The bidder shall arrange at least one (including one) field service engineer, who shall have at least 3 years' working experience. The list and introduction of service engineer shall be provided in the bidding document (if any certificates or achievements are available, copies of certificates and achievements shall be attached).

Joint Bids: NOT Available

Bid without the bidding documents: NOT Available

4. Acquisition of Bidding Documents

Beginning of Selling Bidding Documents: 2022-7-25

Ending of Selling Bidding Documents: 2022-8-5

Sell bidding doc online or notNo

To Obtain: On-site Purchase

Place: project only offer electronic tender documents, please invite potential bidders in this bidding announcement valid period, login (www.jczh100.com) downloading bidding documents after online payment.

Price of Bidding Documents: 1000/$160

5. Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time): 2022-8-16 10:00

Place of Bid: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd.( Address: 1912,19F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

Place of Bid Opening: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd.( Address: 1912,19F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

6. The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on

    www.chinabidding.com.

7. Contact Details

Purchasers:Liuzhou Saike Technology Development Co., Ltd.

Add.: No.1, Cheyuan HengEr Road,Liudong New District, Liuzhou City, Guangxi, P.R.C.

Contact: Mr.Qin Guangyong

Tel.: (0086)772- 2189038

Bidding Agency: Guangxi Machinery and Electric Equipment Tendering Co., Ltd

Add.: 7/F, Jinyuan CBD Building, No.63, Jinhu Road, Nanning, Guangxi

Contact: Ms.Liao Lina, Mr. Su Chang

Tel.: (0086) 771-2833821/2833580   Fax: (0086)771-2830802

8. Remittance Approach

9. Additional Instructions

www.chinabidding.com for International Tendering and bidding of mechanical and electrical products nationwide designated by the State Department of Commerce and public service platform administrative supervision platform, registration please contact www.chinabidding.com., refer to "mechanical and electrical products in the international bidding implementation measures" implementation.